Copper ring with a "whirlpool" with your own hands. How to make wedding rings with your own hands How to make a ring from the base

Helpful Hints

The most beautiful spring holiday is just around the corner, and I want to prepare for my beloved women something special. Why not make a gift by March 8 with your own hands? We offer you ideas for creating original jewelry that will delight your loved ones.

DIY bracelets

Graceful bracelet- a beautiful decoration that is loved by women all over the world. It turns out that making an original bracelet with your own hands is not so difficult. Materials for these fun things can be purchased at specialized stores, including online stores that offer DIY jewelry fittings.

What you may need for a double bracelet:

-- Leather lace 1.5 mm thick and 1-1.5 meters long

Yellow copper ball chain or rhinestone braid 30-40 cm long (approximately to wrap the wrist twice)

Waxed lace or any thick thread 1.5-1.8 meters long

Yellow copper hex nut with a diameter of 0.6 centimeters

-- Scissors

The lace with rhinestones looks something like this. You can find it at any jewelry supply store.

Let's get to work:

1) Fold the leather cord in half to form a loop. This loop will serve as a clasp and into it nut should fit. Tie the loop with colored waxed thread and wrap its base 5-6 times so that the thread does not subsequently loosen and untie.

2) Place a ball chain in the center of the leather lace and begin to tie with colored thread, grabbing each bead one at a time.

3) Continue tying the leather cord with the ball chain until you get product of the desired length to wrap your wrist twice.

4) When the desired length is reached and the ball chain is finished, tie the leather lace with colored thread several times, and tie the end of the leather lace in a knot.

5) Place a nut on top and make another knot to secure it.

6) Cut off the unnecessary lace at the end with scissors, wrap around the wrist and fasten the "lock". The bracelet is ready!

The length and materials are for a double bracelet, but you can make single or triple. Threads can be any color of your choice.

DIY pin bracelet

Pin and bead bracelets- a beautiful and very simple decoration that can be made in several ways, it all depends on your imagination and the materials available.

What you will need:

-- Pins

beads

-- Elastic drawstring

Let's get to work:

1) Do many blanks from beads and pins. Combine colors as your fantasy desires: you can make plain rows, you can multi-colored. Beads of different sizes and textures also look good next to each other.

2) Prepare 2 long pieces of elastic cord and string pins on them.

3) Pin the ends of the laces together when the bracelet reaches the desired length. In the process of work, put the bracelet on your wrist to check its length. Don't make it too tight and too tight so it doesn't clog blood flow, and too loose so it doesn't dangle.

DIY leather bracelet

Leather rope bracelet in the shape of a pigtail, wrapped several times around the arm, it looks quite cute, despite the rather rough material. It is very easy to make it with your own hands.

What you will need:

-- Leather or suede lace (1)

Scissors (2)

Pliers (3)

Clasp (4)

Two rings (5)

Two jewelry clips (6)

-- Wrench (7)

Let's get to work:

1) Cut a piece of leather cord long enough to wrap around your wrist 4 times without being too tight.

2) Cut 2 more pieces of cord of the same length.

3) Holding the ends of all three laces, secure them with a clip.

4) Using a wrench, fasten the laces to the edge of the table to make the product easier to work with. Next, weave the cords into a pigtail.

5) Cut off the excess edge and place the second clip on the second end of the cords, pressing it firmly.

6) Attach the clasp to the ends of the bracelet with the help of rings. The decoration is ready.

Very interesting bracelets are obtained when macrame technique is combined with beads. These bracelets are called Shambhala bracelets. Learning how to make these bracelets is not difficult. The main thing is to understand the principle.

DIY Shambhala bracelet (video)

How to make a ring with your own hands

Do you think that it is impossible to make an original ring at home? You're wrong! It turns out that in your house you can find a lot of unnecessary things which you may find useful in your work. Take, for example, old forks, spoons, knives that you have not used for a long time, but you feel sorry for throwing them away.

We offer an idea of ​​how in a couple of minutes you can make from old iron appliances with elegant handles original ring.

What you will need:

- Any old forks, knives, spoons with beautifully decorated handles. This is the basis of your product. Better if they are silver appliances

-- Metal cutter or hacksaw

Pliers

Sandpaper

Lightweight sheet of paper

-- Pen

Let's get to work:

1) First decide for yourself, what kind of rings do you want to get. You can choose one that kind of wraps around your finger - type 1 (fig. 1), or one of its ends will be hidden and it will not be visible - type 2 (fig. 2). The length of the workpiece depends on this.

2) At the second stage, you need to pick up a suitable cutlery, which will soon turn into a ring.

3) Take a strip of paper and wrap it around your finger on which you will wear the ring. Mark with a pen where the strip meets the other end. If you choose a type 2 ring, please add approx. 6 millimeters and put a bold mark. If you chose a type 1 ring, then you do not need to add extra millimeters.

4) Using the resulting paper measure, you can make a blank for the ring by cutting off the fork handle in the right place with metal cutter or hacksaw.

5) Sand the cut end of the fork with sandpaper so it's not sharp and you won't get hurt when the ring is done.

6) In the last step, you need to carefully use pliers bend the resulting tip of the fork into a ring. If the fork is made of silver, it will be possible to bend it without problems.

7) The result should be something like this:

DIY stone ring

Another very stylish and original ring can be made from a simple pebble that you find on the street, wire and paint. In the example, we will show how to make a ring with a "piece of gold" easily and quickly.

What you will need:

-- A pebble of the shape you like

Golden wire 15-20 centimeters long

Blank for a dimensionless ring

super glue for jewelry

-- Can of gold paint

Let's get to work:

1) First you need to paint the stone from spray paint. To do this, put a pebble on a sheet of paper and direct a jet of paint at it. After drying, turn the stone over and process it on the other side.

2) Using superglue, glue the ring to the stone. The ring should be made of hard wire or metal, and it is better if it is heavy enough. It is also important that you adjust ring size.

3) Wrap the stone with the wire several times along with the ring. It will help tightly attach the stone to the ring, and will also be part of the original design.

4) Wrap the remaining wire around the ring.

5) As a result, you will get a very stylish decoration. You can use any paint you like.

Homemade button ring

In the shop of materials for making jewelry, you can purchase base for the ring, on which you can attach any details: buttons, beads and other materials. An original ring can be made from old bright buttons and a piece of fabric.

What you will need:

-- A round piece of thin black felt about 5 centimeters in diameter (1)

Decorative buttons in desired colors (2)

Superglue, but electric glue gun is better (3)

Base ring (4)

-- Jewelry Pliers (5)

Let's get to work:

1) Remove the sew-on loops from the buttons with a pair of pliers.

2) Glue the buttons to a piece of felt from the center in a circle close to each other to get a round shape. Let the glue dry properly.

3) Cut off the excess felt from the sides. The edges can be left slightly uneven.

4) Lubricate the base of the ring well with glue.

5) Glue the ring to the previously obtained button part. Let dry.

DIY necklaces

Necklace- a beautiful decoration that always catches the eye. If you like large bright necklaces, we suggest you try to make it with the help of decorated pistachio shells.

What you will need:

-- Single pistachio shells (1)

Small piece of thick cardboard (2)

Glue gun or superglue (3)

Nail polish or acrylic paint (4)

Tassel (5)

Chain (6)

2 rings and clasp (7)

Pliers (8)

-- Scissors (9)

Let's get to work:

1) Cut out a semicircular pattern from cardboard, which will become the basis of your necklace. Its size is up to you.

2) Attach rings and a chain to the edges of the pattern using needle nose pliers.

3) Prepare shells for pistachios, pre-decorating them in the desired colors.

4) Using glue, glue the shells to the base, starting from the edge. Advice: before gluing, attach the shells to the cardboard and think about how you will lay them out.

DIY beaded necklace

To make this jewelry, you need to choose beads of the desired color. The size of the necklace largely depends on the size of the individual beads, so if you want a thicker piece of jewelry, choose larger beads. It is difficult to say how many beads you may need, but it is better to take a margin.

What you will need:

-- Beads of the same or different colors (1)

Chain (2)

Scissors (3)

Pliers (4)

Adjustable rings - 2 pieces (5)

Clasp (6)

Calottes - special clips for attaching beads to a chain and disguising knots (7)

-- Fishing line or thick thread (8)

Let's get to work:

1) Cut off 6 pieces thread or fishing line approx. 25 centimeters, on each of which string beads in a length of approximately 15 centimeters.

2) You should be able to 6 strands of beads, from which you need to make 3 pairs, connecting the ends of two threads and fastening along the edges with calottes. Make sure the knot is tied as close to the beads as possible so they don't dangle. Cut off the excess thread.

3) Connect 3 pairs of threads to the chain with a ring, and then do the same with the other ends.

Advice: before connecting the other ends of the beads to the chain, braid them into a pigtail to get the effect of interlacing.

4) The chain should be pre-divided into 2 parts depending on the desired length and connect both ends with a fastener.

5) As a result, you should get a necklace like this:

DIY neck decoration

The original decoration on the neck can be made from a simple champagne corks with a little imagination.

What you will need:

-- Cutting board

sharp knife

Champagne cork

Super glue

Leather or suede cord about 1 meter long

Beautiful button or earring with a pebble for a central detail

Nuts: 1 regular hex and 2 cap nuts

-- Pin

Let's get to work:

1) Cut with a knife about one third of the length of the cork. In the larger half, make two holes with a drill, and then, using a pin, pull the two ends of the lace into both holes.

2) Thread the ends of the laces through the nut and secure it to the bottom of the cork. To the ends of the laces glue cap nuts. Attach an earring or button to the center of the cork on the convex side.

As a result, you will get an original decoration, the length of which can be adjusted.

DIY hairpins

hair clip can be made with a piece of lace beads and feathers. Such an original vintage-style hairpin is suitable not only for brides' outfits, but also for other festive outfits.

What you will need:

-- Lace ribbon 2-2.5 cm thick and 45 cm long

Piece of white felt

Scissors

Gluing gun

Threads with a needle

Bead or decorative button

-- Basis for hair clips

Let's get to work:

1) Sew a white lace ribbon with a thread so that, by tightening the thread, you can roll flower. You can sew by hand or use a sewing machine.

2) Cut out a circle of felt with a diameter of about 5 centimeters. Glue the lace to the felt with a glue gun.

3) Glue a pair of feathers and a hairpin to the felt on the back side. Let the glue dry.

4) Glue or sew on a bead or decorative button in the central part.

DIY feather hair clip

Hair clips with feathers look very impressive. If these are bright and colorful feathers, then the decoration is suitable for festive outfits, if the feathers are natural colors - such hairpins can be worn with everyday outfits.

What you will need:

-- Usual hairpin base

Piece of felt material

A glass or any round measure in order to cut an even circle

Beads or decorative buttons

Scissors

-- Glue gun or superglue

Let's get to work:

1) Using a glass or other tool, cut out two circles with a diameter about 5 centimeters or more depending on the size of the base clip.

2) After making the cuts, insert the base into one circle of felt.

3) Glue two circles of fabric with glue to strengthen the base clip.

4) On the reverse side, glue the first bottom layer of feathers, then the top one.

5) Glue a bead or decorative button in the center.

6) The hairpin is ready.

DIY earrings

Interesting upgrade option. hoop earrings you can do it yourself by adding hanging laces to them. If you are tired of ordinary hoop earrings, updating them is easy. Moreover, laces They are as easy to remove as they are to attach, so you can restore your earrings to their original look at any time.

What you will need:

-- Any hoop earrings, in the example - with a detail inside the ring

Thin laces of any color

-- Scissors

Let's get to work:

1) Prepare the desired number of laces of the desired length, depending on the size of the ring. Please note that the lace will be folded in half.

2) Fold the string in half and pass the ends through the loop, capturing the ring, as shown in the photo. Do the same for all laces.

3) At the end, you will get such a product with a "fringe". You can also trim the ends of the laces with scissors.

DIY feather earrings

Decorations that are used as details look very original. bird feathers. Feathers can be bought at a jewelry store, or found elsewhere. In stores there are feathers not only in natural colors, but also artificially dyed.

5) And attach the fastener-hook to the ring.

6) As a result, you get such an earring. Make the second earring in the same way.

Every day, future spouses, couples in love and people who are preparing to celebrate their wedding anniversary come to the Zelenin & Yolkin jewelry workshop. The idea of ​​how to make came to Russia not so long ago from Europe.

The desire to surprise a loved one, to please him and give something really worthwhile drives each of us, and to create a ring with your own hands is to give a big piece of yourself in a small piece of jewelry.

No wonder, because a master class on creating wedding rings is a symbolic and touching event, both for a couple in love and for spouses, and the opportunity to create your own individual design of rings attracts lovers of exclusive jewelry.

How to make wedding rings with your own hands - a master class

Let's start with the positive aspects of the master class on creating rings:

New opportunities

Many people think that they cannot create, for example, a gold ring with a diamond, because jewelry requires perseverance, a keen eye and titanic patience. However, the jewelry workshop "Zelenin & Yolkin" daily witnesses how even the most timid apprentices create real masterpieces with their own hands. Master the skills of jewelry craftsmanship in three to four hours? Easy!

This is a charm!

In fact, this is how guests rate the rings they have just made with their own hands. It is impossible not to appreciate such rings, and the very history of the creation of the ring remains in the memory for a lifetime.

New life for old jewelry

Often young people come to us already with their jewels, which have lost their original beauty under the yoke of "millennia". Family jewelry inherited from grandmothers and their grandmothers sometimes needs a new life. That is what their current owners think. Therefore, many come to make wedding rings from their own gold. Giving life to an old decoration that will shine with new colors is not a miracle?

A test of strength or an opportunity to prove yourself

This is exactly what lovers think when they undertake, as it seems at first, difficult work. Step by step, coping with each stage of creating the ring, the guests have inexpressible emotions: “I didn’t know that I could do that!”

Exclusive rings

This will surely please the female half more. Lovers of beautiful things that will belong to them alone - in stores you will have to pay a fortune for such an ornament, but here you can create to his sketch the most unique ring, which will definitely be executed in one single copy.

The perfect gift

Often, people who want to make a ring as a gift turn to the jewelry workshop: for their mother, loved one, best friend, their child, etc. The ring is especially expensive because it is created by hand, and the best gift is a handmade one. On the back of the ring, a commemorative inscription, date, etc. is usually made.

Time saving

It would seem that 3-4 hours, during which a master class on creating wedding rings takes place, is not so little. However, residents of Moscow know that the search for rings that both spouses will like will take much more time, and disputes over the texture and design of rings without a professional jeweler may not lead to anything at all.

Disadvantages of making DIY wedding rings

The downside of DIY ring making is that you really have to put in some effort to make the jewelry you want. Sometimes people just don't like to "bother", and it's easier for them to buy than to do it themselves. In this case, in our workshop, jewelers will make absolutely any wedding rings to order.

How is the master class

A master class on making wedding rings with your own hands in Moscow takes place in several stages:

• After the model of the ring and the main parameters are chosen, the guests can start creating the rings.

• The jeweler shows how to work with the precious metal and gives guests the opportunity to create a ring by themselves according to the best traditions of jewelry.

• The prepared precious metal is melted by a burner in a crucible and mixed with a ligature to obtain the required sample and color. The alloy is poured into a cast iron mold, which gives it the shape of an ingot.

• The finished ingot is rolled through a rolling press. This allows a rectangular bar to turn into a blank of the required product.

• A long plate is bent into the shape of a ring, and its ends are soldered.

• The output is an almost finished ring, which remains only to bring to perfection.

• The product is put on the crossbar, and with the help of a textolite hammer it is given the ideal shape of a ring.

• At the next stage, you can already deal with fixing precious stones, engraving and creating the necessary texture. After all, then the treasured ring remains only to be polished and tried on. Even seemingly simple wedding rings play with different colors and radiate the energy of the creator, warmth and atmosphere.

Do-it-yourself ring? Quite easy! A detailed master class with photos and instructions will tell how to make a ring at home. Good luck!

site - Navigator in the world of gifts and souvenirs

Ira Frid - jeweler, designer, artist. She makes amazing pieces, minimalistic, and very lively. Metal merges with wood, gold with silver to wrap around your finger in a delicate ring. Fragile twig pendants, shard earrings, drops. Dots, commas and quotes - stylish and "delicious" as I like :)

In her work, she is guided by two rules:
Simplicity will save the world!
There are no ideal forms in nature and I like it!

Ira is inspired by Scandinavia and minimalism, which defines the simple, Nordic beauty of her jewelry.

Ira equipped a real workshop at home, because working with metal obliges you to work on machines, be able to control burners and even with dental burs (!)

But it is always better to see once: Ira showed us the whole process of creating a product, in this case, a ring, from beginning to end.

"So, let's begin!
First, we collect the required amount of silver and melt it into crucibles into a common mass.

When the metal becomes liquid, we pour it into the mold. In it, the metal is fixed and instantly cools ...

Here in such a "bullet". Bullets can be different depending on what "caliber" we have chosen.

Further, in order to get closer to the shape of the ring, we need to make a strip from the "bullet". To do this, we need a Rolls machine, where the metal scrolls between two shafts. First, we level the square to the desired size in grooved shafts, and then scroll in flat shafts and get a strip of the desired thickness.

During the rolling of the metal, it needs to be annealed periodically, or, as the jewelers say, “let go”. This is done in order to remove stress from the metal and it is easier to roll further.

To get a specific ring, for example, size 17.5, we need to measure the strip of the desired size. They gave me an excellent formula that I always use: strip thickness 1.7 times 3 + ring size 17.5 times 3 = 57.6 mm (required strip length). Then we need to connect the edges and close them into a circle.

They should close very tightly, only then we can quickly and well solder the ring. We do this with a torch and solder (an alloy of silver and other metals).

When the ends are firmly fastened, we put this strange shape on the Rigle and knock to spite the neighbors on the future ring with a wooden hammer, giving it the perfect shape and the right size. And now we already have a full-fledged ring that can be put on a finger, though not very beautiful yet :) We begin to decorate it. First we throw in the bleach for 2-3 minutes and the blackness from the ring goes away.

Then we carefully work with a needle file, smooth out all the bumps and release the beauty of the metal.

Do not forget to collect silver filings, they will later turn out the same beautiful rings :)

After the file, we go to the drill and grind the ring a little more with sandpaper. And now, the ring is ready! But we have not a simple ring, but with a duck.

We scratch an approximate drawing on the ring and move on to all well-known dental burs. No, no, we won’t treat teeth yet, but they will help us make a duck.

Something like this, working with burs, we first get something similar to a duck, and then a real one. Quack quack!:)

In order for the duck to be clearly visible on our ring, it needs to be blackened. There are different ways to blacken, one of them is very simple and I use it for small details. Blackening is done with a candle and iodine. So, first you need to smoke the necessary place, and then burn it with iodine.

Let's move on to the photo report? ;)

The workshop is located at the developing Crystal plant. Since it was already getting dark, it was raining and I was late, I did not photograph it. But it is very atmospheric, so I illustrate the story with a photo from the Internet:

The plant is located near Yauza, across the river from Winzavod and Artplay. Now, when I was looking for a photo, I saw that the plant will be reconstructed: they plan to make a pleasant public space here with cafes, shops, creative offices and other things. Already last summer, fairs and festivals were held there, a lot of people visited the new place. The concept and appearance are reminiscent of the Flakon design factory, isn't it? Competition! :)

But about the factory another time, I want to go back there when the weather is better to explore a new party place;) And now let's get back to the master class, which took place in the creative workshop. It is combined with a small but nice photo studio, so there are a lot of cameras of varying degrees of vintage, paintings and paint-splattered easels. Atmospheric place!

This is how a jeweler's workplace looks like - nothing luxurious, but not only silver is processed here, but also gold and precious stones. Below is a pedal for a grinder.

First we took a small amount of silver and melted it down.

After that, the molten mass was poured into a mold, where it froze, but not firmly. In general, silver is a rather malleable metal and can be worked with for some time without a new melting.

Having cooled the resulting "sausage" in cold water, we proceeded to the run-in. It takes place in two stages: first you need to set the width of the ring (the right side of the machine), and then the thickness (the left side). You insert the sausage into the opening, twist the handle and it crawls through the hole. The running-in occurs gradually, for each of the stages there are about 30 scrolls. That is, you can’t immediately take and flatten the metal in one scroll - then it will crack and you will have to start over.

During the last scroll, you could print on the metal (it's still soft, remember?) some kind of pattern. They offered me a piece of lace, something else - I chose a leaf, because quite recently I had a ring in the form of a twig, and I decided to make this ring on a phalanx. It turned out such an eco-theme :)

After that, with the help of a thread, I measured the girth of the finger and cut off the required amount. It was difficult, because the jigsaw must be kept strictly vertical and ensure that it does not “leave” to the side. They helped me here, since this is an important stage - the saw cuts must be perfectly even in order to connect later.

Then a ring is formed from the strip around the cone-shaped stick with the help of a soft hammer. I am very focused and tense :)

Now it's time to bleach the silver in acid in order to return the original color - it darkens after being melted down.

The next stage: grinding in several ways. First, the side faces of the ring are polished with sandpaper.

Then the outer and inner sides are polished with sandpaper twisted into a drill. The ring must be held tightly, otherwise it may fly into the eye. And this is not so easy, because it vibrates strongly under the influence of a drill - it flew away a couple of times, so I preferred to take a picture of this stage :)

After that, the ring goes through the last stage of grinding on a machine with a rapidly spinning rubber "wheel". From rapid friction, the ring instantly heats up and after each touch to the "wheel" it must be lowered into cold water.

Everything, the ring is ready! It remains only to clean it in an ultrasonic bath - leave it there for 10 minutes. You can relax and wipe the sweat of zeal from your forehead :)

And here is the result!

An indescribable feeling when you yourself do some thing: now I wear this ring without taking it off - here it is, the power of handmade. So I advise you to go to the master class, it is not at all expensive. Or an option for guys: buy a certificate for MK and give it on February 14 or March 8;)

Thanks to my jewelry mentors who helped me in creating a photo report!

In the nineties, when the country was faced with such a concept as a shortage, and it was almost impossible to get something worthwhile in stores, practically no one asked how to make a ring out of wire, and no one could be surprised by such a homemade jewelry. Now this trend has moved aside, a bunch of jewelry has appeared in stores literally for a penny. But there are women of fashion who know how to make a wire ring with their own hands so that it fits organically into the image.

Necessary materials

To make this simple decoration, you will need quite a few tools and materials:

• Any thin wire, preferably aluminum. For children's rings, you can use the one that is covered with insulating plastic.
• Round nose pliers.
• Scissors for cutting metal.
• Beads.

How to make a wire ring with the inscription love

In order to make a wire ring with the inscription love on your own, you must initially have some experience with this material. With a certain skill, creating such an accessory for you will not be difficult.

By this principle, you can write almost any word. But it must be remembered that it must consist of three or four letters in order to fit on the outside of the finger.

How to make a DIY champagne wire ring

Some romantic men in a fit of feelings, when nothing is at hand but a bottle of champagne, still want to make their girlfriend happy, at least with a wire ring. In this case, they can come to the aid of the wire on which the cork of the bottle is held. The principle of making such a ring is very simple.

Ring with a bead inside

And how to make a wire ring so that it is unusual and at the same time very attractive? Most likely, those around will not leave indifferent the product in which the bead is hidden.

To make it, you will need to repeat the first points from the section "How to make a ring from champagne wire", only instead of forming a rose from the free ends, you will need to make a small spiral, put a bead on it and start randomly wrapping the free ends around it . It is necessary to achieve such an effect that the bead continues to look through the wire. But as if it would be all covered with cobwebs.

Another option is to pass the free end of the wire through the bead, set it in the middle of the ring and make a couple of turns of the wire around the bead so that it is all over the ring.

Such an accessory will be a great addition to a romantic look.

Unusual accessory: leg ring

An excellent summer decoration will be a ring worn on the leg. This accessory will look great with open shoes and boho style clothes. Here is a detailed plan on how to make a snake-shaped copper wire ring.

1. Take a wire 10-12 cm long.
2. Attach it to the toe on which you plan to wear jewelry, on the reverse side exactly in the center of the wire.
3. Wrap both ends around your finger to make two turns.
4. Remove the ring from the leg and bend one end of the wire with the help of round-nose pliers several times, imitating the tail of a snake. Cut off the excess.
5. Using the same pliers, bend the upper end of the wire in the shape of a snake's head and wrap the free end down so that it hides under your finger while wearing the product. Trim off the excess.

Ring with semi-precious and precious stones

If you are still wondering how to make a wire ring and none of the options proposed above appealed to you, then you will definitely be delighted with this jewelry. In the event that you have some beautiful and small natural stones, you just need to turn them into a beautiful ring. It is good if there is already a hole in the stone, for example, if it is left over from another piece of jewelry. But you can just glue the stone in the center of the product. All of the original work follows the steps of making a champagne wire ring. But for this product, it is better to take a very thin copper or gilded wire and fold it not two, but three or four times. Then the free ends need to be twisted around the stone.

Beaded wire ring

Jewelry with beads looks very beautiful and gentle. To understand how to make a wire ring with small beads, it is not necessary to have experience in creating such products. All you need is to string just enough beads onto the thin copper wire so that they cover the top of your finger. Then, on one side and on the other side of this bead row, you need to make small rings with the help of round-nose pliers. Now take a small piece of wire and fasten it to the ring of the bead row, then repeat the same on the other side. Measure the product: if it fits you in size, then cut off the excess, if not, then first change the size up or down.

Wedding rings: imitation wire weaving

Interestingly, a few years ago, the world of wedding fashion was swept by a wave of wedding rings, as if woven from wire. Newlyweds invest in this accessory an individual and personal meaning only for them. But most often, such rings hint at the absence of a rigid framework within the newly-minted family. These non-standard wedding rings are chosen by girls and men who do not want to wear ordinary, strict jewelry, but want something more tender and youthful. In addition, often such accessories are made in the form of a nest, which symbolizes family.

And how to make a wire ring for a wedding with your own hands? Not many people decide to make an accessory for such an important day on their own, but you can still participate in the creation process: draw a sketch of your future jewelry and take it to the jeweler. So you are guaranteed to receive exactly the ring that you imagined.

Thus, you have learned how to make a wire ring with your own hands in stages. It's fun to experiment with this stuff, so don't just stick with the tips in this article and try something new!