Quickly wash windows without streaks at home. How to clean a plastic window? How to wash windows without streaks at home

Windows are our view of the world around us, so the crystal clearness of window panes is very important. It takes a lot of effort to make them transparent and prevent streaks and lines from appearing. Perhaps that is why each housewife postpones the washing process until a special occasion. How to clean windows without streaks and special difficulties, let's try to figure it out below.

How to wash windows without streaks at home

People living in ecologically clean areas, as a rule, do not find it too difficult to wash such surfaces; it is enough for them to wash off a little dust or sand. However, it is more difficult for people living in industrial cities to achieve clean glass. Largely due to the fact that not only dirt settles on them, but also fat from harmful fumes. Therefore, it is doubly important for them to find the answer to the question of how to clean a window without streaks at home.

The entire course of work can be divided into several stages:

• You should not wash all the glasses at once, first you need to completely clean one, and only then take on the next. Moreover, it is best to start washing from its inner surface, which is much cleaner.
• First, you need to dissolve a little powder in a bowl of warm water and clean the glass surface using a sponge.
• It is important to wash not only the glass, but also the frame, handles and other elements.
• Be sure to wash the cleaning agent with cool clean water.
• In order to avoid the appearance of streaks, you can crumple the newspapers and wipe the glass with them.

Washing windows with a special mop - quickly and efficiently.

In the event that a part of the glass is dirty, it makes sense to use special napkins used to clean it. When choosing how to wash the window, do not forget about washing with a special mop, which has a sponge and a rubber scraper at the end. Such a device must be dipped in soapy water, squeezed out and thoroughly walked over the entire surface. In conclusion, you need to carefully wash the glass with the same mop, only you need to replace the water in the basin.

How to properly clean windows

To figure out how to properly wash windows, you need to first prepare some devices:

• several types of sponges, differing in rigidity;
• a mop with a foam tip or rubber squeegee;
• dry cotton fabric;
• synthetic napkin;
• container with water;
• any foam-based dishwashing liquid.

It is easy to clean the windows with high quality without streaks if you adhere to the following steps:

• using a foam rubber sponge, moisten the entire surface, paying special attention to the places where the glass meets the frame;
• then take a rubber scraper and use it to remove excess water down to the windowsill;
• now moisten the surface a second time with a sponge;
• the main contaminants are washed out using a scraper, it must be held at an angle of 30 degrees, and led in a horizontal plane;
• after the scraper has reached the edge, it must be wiped dry;
• as a result of several movements of this kind, the glass surface will be completely dry;
• this method allows you to answer the question of how to quickly clean windows without much effort. Do not forget that in conclusion you need to step back a couple of steps and evaluate the work;
• if stains or contamination are found, they are carefully washed with a synthetic napkin;
• when the inside is washed, you need to repeat the procedure with the outside.

How to clean windows on a loggia or balcony from the street side

The first step is to wash the frames. Wooden frames are cleaned with households. soap.

The loggia, located on a high floor, requires utmost care when cleaning the glass, so here the question of how to clean the window so that there are no streaks is in second place, after the question regarding the safety of the hostess.

Washing such surfaces, especially their outer side, should be carried out as follows:

• first open the windows and wipe the frames thoroughly;
• in the event that they are made of wood, you can use ordinary laundry soap, if they are plastic, then any soap;
• wash windows from top to bottom, rubbing the detergent composition in a circular motion;
• if the frame cannot be opened, the answer to the question of how to clean the window from the outside is as follows: wash them with a scraper with a long telescopic handle, a brush of this type must be moved from the far side of the window towards you;
• after all the dirt has accumulated in one place, it must be scrubbed from top to bottom and removed;
• now the procedure must be repeated, only using clean water for rinsing.

If the apartment is on a high floor, then it is better to entrust the cleaning of windows on the balcony or loggia to professionals.

It is worth noting that the glass on the balcony is not cleaned very often, so in cases where you live on high floors, it is best to use the help of specialists. They know how to clean balcony windows efficiently and safely, and do not charge too much money for services. Professionals wash glasses using different means and methods, making them squeaky clean and free of any streaks.

How to make a window cleaner at home

Existing liquids do not always help to figure out how to clean windows quickly and efficiently, many housewives prefer to make their own stain-free window cleaning products, which are no less, if not more effective, in comparison with store ones.

The simplest recipe is as follows:

• Mix 3 tablespoons of vinegar and 1/2 teaspoon of any dishwashing liquid;
• make a solution by adding water, and then pour it into a spray bottle;
• after shaking with the agent, you can wash the window, not only does it perfectly clean the surface and washes off with water, this substance almost does not leave streaks.

Each housewife has her own window cleaner in her piggy bank, which is developed independently and has been tested more than once on personal experience. They are not only absolutely environmentally friendly, but also save the family budget quite well.

How to clean windows with vinegar

Folk remedies for washing windows are much more effective than industrial ones, therefore, when choosing what to wash windows, you need to remember about those products that are in every kitchen cabinet.

Most often, vinegar is used, which has good properties for disinfecting and cleaning surfaces. It is absolutely safe for inhalation and it is quite easy to clean glass with it. How do you do it?

• apply the mixture to the surface;
• rub the composition with napkins over the window;
• wash the window with vinegar;
• Wipe it dry with a microfiber cloth.

How to clean windows with ammonia

Ammonia and vinegar are wonderful remedies that are in no way inferior to store-bought ones.

Ammonium is another fairly effective remedy that is good at removing dirt and streaks from the glass surface. To clean windows quickly, you need to do the following:

• remove the curtains and remove all foreign objects from the windowsill;
• process the frame and window sill;
• moisten a sponge in a composition containing ammonia and water, which must be diluted beforehand;
• apply the substance to the surface, then carefully polish it with a soft cloth.

Having figured out how to wash windows with ammonia, you may not want to use store-bought formulations that will not give such a result, but also have a decent cost. The ammonia washes the windows cleanly and does not leave any traitorous stains at all.

Folk remedies for cleaning windows without streaks

Half a potato will help get rid of dirt on the windows.

Asking how to wash windows without streaks, in addition to the above methods, you should know about such rather popular folk recipes:

What weather is better to wash windows

Always wear protective gloves when cleaning windows.

Thinking about the best way to clean windows, do not forget about the main thing - the weather, which is ideal for cleaning them.

The bright sun is unlikely to help, because streaks will not be visible, and the liquid on the surface will dry very quickly, making it impossible to wipe it off with a rag. And the rain is unlikely to be an assistant, because it will not allow you to wipe the glass dry. Therefore, it is best to do this business in cloudy weather when there is no precipitation.

In addition, it is worth remembering some rules that will make cleaning safe and easy:

• be sure to wear protective gloves;
• if products containing ammonia are used, it is important to properly ventilate the room after cleaning;
• if the windows are tall, use a long-handled mop, it is much safer than a pyramid of chairs and stools.

Summing up, it is worth noting that washing window openings is not an easy task, which requires a certain skill and experience. It is important to remember about your own safety, which needs to be put to the fore. And the use of folk recipes will ensure the cleanliness of the glass and allow you to wash the windows without streaks.

Clean window panes in the apartment are the pride of a zealous hostess. Knowing how to properly clean windows and what to use for this, you can turn this element of general cleaning into an easy task. Cleaning windows after renovation will also become much easier if you know what to use for this. Such information is also useful in order to make it easier and better to clean mirrors, cabinet doors and interior doors with glass inserts.

We stock up on everything you need

To quickly and well wash the windows in the apartment, in the rooms and on the balcony, you need to prepare just a few things:

• container with water;
• several sponges;
• microfiber wipes or a scraper with a rubberized nozzle;
• washing solution.

For glasses there are special products that do not leave streaks: Cif, Mister Muscle, Clin and others. For the profile, non-aggressive household chemicals without acids and strong alkalis are suitable. The plastic window sill and the profile must be washed with products that say “for plastic” on the label - “Pemolux”, “Sanelit”, Cif.

A convenient wiper is a key factor in making windows easy to clean. The model with a long handle will allow you to clean windows of any height without a stepladder. This is especially true in an apartment with high ceilings and on a balcony, where the windows can be up to the ceiling. If you buy a double-sided model - with a foam sponge and a rubber squeegee (a plastic scraper with a rubberized pad) - this will further simplify the washing process.

My windows

How you clean your windows depends on how dirty they are. With light dirt, this can be done quickly: just spray with a streak-free detergent and then wipe the glass with a microfiber cloth. The frame and window sill - plastic or wooden - just wipe with a clean, damp cloth. In other cases, you will have to devote a little more time.

How to clean windows without streaks in an apartment - step by step instructions.

• Free the windowsill: remove flowerpots and other items.
• Wash the frame with detergent solution and then wipe with a damp, clean sponge.
• Apply the detergent to the glass with a sponge and wait a few minutes until the active ingredients destroy the persistent compounds.
• Then wipe the surface with a damp, wet sponge or foam rubber wiper blade. Both the sponge and the nozzle should be periodically rinsed in clean water.
• If a non-specialized glass detergent was used as a detergent, then it is necessary to spray a solution with ammonia: 10 ml of ammonia per 200 ml of water.
• Wipe dry with a cloth or rubber scraper.
• Wipe the frame again - clean.
• Wash the windowsill in the same way as the frame.

To avoid streaks, you need to start washing from the bottom up. Another nuance is that the solution with the detergent on the window should not be allowed to dry. Dried soap particles rubbed with a dry cloth and form most of the streaks. It is better to bleach a yellowed plastic window sill with a mixture of whitening gel and hydrogen peroxide, but you should not rub it with abrasive sponges.

When using a window squeegee, the corners of the panes remain poorly cleaned. You need to wipe them by hand, especially at the bottom, where all the water flows, with napkins or an ordinary cotton rag.

How to clean windows outside?

If the sashes open inward, then washing them is as easy as the inside, but there is a situation when one of the sashes is deaf, that is, it does not open at all, or the sashes open outward. This situation is especially common in an apartment on the balcony. Most often, the windows open outward precisely on the balcony (to save space) and a blind profile is installed there - already in order to save money. In a private house, a stepladder may be the solution, but how to clean windows of this type outside in a high-rise apartment? Here, sponges and napkins are not suitable for washing, only a telescopic wiper can be the way out. It has a long handle that bends to the right angle and allows you to clean hard-to-reach areas of blind windows.

Another peculiarity of glass washing from the outside occurs in an apartment on the ground floor, where sand and other dirt gets into. If the sand is stuck, then you need to wash it carefully: you need to remember that this is an abrasive that can scratch the surface of the glass. As a result, it will become cloudy and transmit less light. Such adhered particles should never be cleaned off with hard brushes or abrasive sponges. It is better in this case to wash with a washing vacuum cleaner. However, if it is not there, you just need to arm yourself with patience, moisten the dirt with a cleaning solution and wait 10-15 minutes until they are “soaked” (in this case, re-moisten the glass from time to time). Then the window is washed in the usual way.

How to clean glass after repair?

The peculiarities of cleaning windows after repair are to select a substance that can dissolve paint, whitewash or wallpaper glue. There are also questions about how to clean the windows in the rooms and on the balcony, if they have masking tape, dried plaster or putty solution on them.

Here is a list of what will help you to keep your windows spotless after renovating your apartment.

• Drying oil, vegetable oil, turpentine, solvent R-5 or R-4 will help to clean the masking tape or adhesive traces from it. Thinner cannot be used to clean the window sill and profile.
• Regular scotch tape can be removed with isopropyl alcohol (can be used on a plastic frame) or a special Sticker Remover.
• Lime and chalky whitewash on the window is washed off with Cif Glitter Gel. The same tool can be used to clean the windowsill.
• Dried water-based acrylic paint (modern version of whitewashing) can be removed with "White Spirit" or gasoline.
• Acetone and "Thinner 646" will help wash away enamel and nitro enamel stains.
• Dried cement-based mortar remaining after renovation in the apartment can be removed with phosphoric acid or Atlas Szop. These substances must not be allowed to fall on the profile.
• The Macroflex and Thinner 646 remover will cope with the softening of the polyurethane foam that gets on the window. First, you need to cut off the maximum possible layer, and then soften the remainder with solvent agents and remove using a plastic spatula or scraper.

Grandma's ways

Previously, there were completely different ideas about how to properly clean windows. Back then, window mops, rubberized scrapers, and wizard-based stain removers did not exist. Everything had to be done with great effort and patience; it was impossible to quickly clean the windows. If you imagine how much effort our grandmothers spent to clean the windows in the entire apartment and on the balcony, then the modern arsenal is especially pleasing.

But there are situations when there are no household chemicals and necessary appliances at hand, then the time comes to remember the folk methods.

• A mixture of any detergent, vinegar and water will remove dirt on the glass and frame. Ratio: 70 ml of vinegar and 0.5 teaspoons of washing powder per 500 ml of water.
• Another mixture: 1 teaspoon of borax, ¼ teaspoon of baking soda, ¼ teaspoon of powder or grated washing soap in 250 ml of hot water.
• A weak saline solution was used to clean the windows, after which the glass was wiped off with newspapers.
• Ammonia (ammonia) from the arsenal of grandmothers passed into household chemicals. It is the most effective stain-free glass cleaner. It is diluted in a ratio of 10 ml to 200 ml of water.
• A solution of water and glycerin was used to keep the glass clean for longer. It was especially important to apply it in hard-to-reach places - outside on the balcony and on the glass of blind windows.

What means to choose so that the windows in the apartment shine with cleanliness - household chemicals or folk methods - each housewife decides. The main thing is that the selected funds correspond to the type of pollution and window profile.

It is believed that plastic windows need to be washed only a couple of times a year. In order not to damage the frames and glass, you need to carefully approach the choice of cleaning agents and know what is better and how to properly wash plastic windows.

This article will cover the issue of cleaning windows.

The main mistakes when caring for plastic windows

First, you need to familiarize yourself with the main mistakes when caring for PVC windows.

Usually errors are associated with the use of:

Plastic windows cannot be washed with hard sponges, otherwise, instead of smooth, you will get patterned glass

1. Aggressive cleaning products. They must be free of abrasives, for example, do not use Pemolux cleaning powder, which can leave scratches on fragile glasses and on a plastic profile.

Also, do not use gasoline, alcohol, or acidic solvents to clean windows. Otherwise, your windows will soon turn yellow.

2. Hard sponges with abrasives so that there are no numerous scratches on the plastic window.

3. Sharp objects when scraping dirt from a window - no knives, chisels or screwdrivers if you do not want to get scratches both on the frame and on the glass.

Observe precautions when cleaning plastic windows... There are several of them:

When you wash the window, lean on something "reliable" - a window sill or your husband

1. Do not lean out of the window too much or protrude onto the outside of the window sill

2. Ask you to hold back for a safety net when you wash the window from the outside.

3. Choose a stable surface as an access to the window

You can quickly and correctly wash plastic windows without streaks and stains with your own hands in several effective ways.

The first way to care for a plastic window

Washing a plastic window using a special spray, soft cloth and paper.

This method is useful for those who have small and slightly dirty plastic windows.

To better wash plastic windows, you will need: soft cotton cloth or sponge, spray (with spray nozzle) for window care, newspaper or paper, bucket or basin (for water), household gloves.

The instruction is as follows:

If the windows are not high, they are washed with a soft cloth.

1. Put on gloves and fill any container with some warm water and soak a soft cloth (so that there are no scratches on the window) or a sponge. Squeeze it harder so that the water does not drip from the cloth, but the latter would be damp.

2. Wipe off dust and dirt from the window frame.

3. Spread the wiper in a zigzag pattern over the entire window. First wash the plastic windows outside and then inside the apartment.

4. Take a clean cotton cloth or sponge and proceed directly to cleaning the plastic window. Wipe in a circular motion.

5. To make the window shine, wipe it with newspaper or paper, that is, polish it properly.

If you want to know why plastic windows turn yellow and how to avoid it,.

The second way to care for a plastic window

It is better to wash the plastic window using a special solution and a special screed with a sponge on a long handle (25-30 cm). This is much more convenient, especially if your windows are high above the floor.

And to wash tall windows, or windows from the outside, you can use a screed with a sponge

1. Prepare a cleaning solution. There is several options for making a cleaning agent:

• per liter of water 1 tbsp. a spoonful of starch
• 1 glass of vinegar per liter of water
• per liter of water 1 tbsp. a spoonful of ammonia
• per liter of water 50 g of chlorine lime
• 2 liters 1 tbsp. a spoonful of ammonia

Or get a special window cleaner without abrasives. For example, "Aos", "Mister Muscle" or "Ajax". It is necessary to drop 7 drops of such a product into a bucket of warm water (2 liters).

2. Dip a sponge into the prepared solution. Squeeze well. So that there are no divorces.

To remove water from the glass, the rubber end of the screed with a sponge is driven along or across it - as it is more convenient

3. First wash the frame of the plastic window outside, then inside the room. Gently wipe off dust and dirt from all corners and edges of the window.

4. Change the water to clean, warm water and dip the screed with a sponge in it.

5. Walk with a sponge, and then with a tie (rubber edge) along the entire height of the plastic window, that is, from top to bottom, without touching the bottom - about 2-5 cm. Periodically dip the sponge into water.

Wipe the rubber edges of the screed every time you pass over the glass to avoid streaks on the window.

6. After making sure the windows are clean, wipe the screed with a dry cloth. Move left to right across the glass to remove water from the lower edges of the window.

7. Wipe hard-to-reach places (edges, corners) and the sill of a plastic window with a clean cloth or paper towels.

Use a synthetic suede or microfiber cloth to clean the windows. It will not leave lint behind.

How and what to clean windows from scotch tape

You can remove pieces of scotch tape from the surface of the plastic window in several ways:

Using scotch tape

Glue a piece of new tape to the marks of the old one.

Then pull off this piece abruptly. If you cannot immediately remove the remnants of the old adhesive tape, then repeat this procedure several times.

Oil use

Scotch marks can be removed with ordinary sunflower oil.

Tea and citrus oils, as well as mint, sunflower and vegetable oils are suitable.

1. Put oil (vegetable or sunflower) on a sponge and apply to the part of the window where there are traces of the tape. Leave it on for 10 minutes: the glue will soak in the oil and swell.
2. Wipe the window with a clean, soft cloth.

Using rubbing alcohol

Apply a cotton swab soaked in alcohol to the tape. But first apply this solution on a small area. Since different types of plastic can react differently to this effect.

To make the window shine ... and not break

Washing the glass inside and outside is sometimes not enough. To make it look like new and work with a bang, do the following:

A little alcohol won't hurt glasses

1. For durability, wipe them with a solution of 30 g of water, a couple of drops of ammonia, 70 g of glycerin.

2. Rub the glasses with a solution (1 teaspoon of copper sulfate per liter of water) so that they have an attractive greenish tint. Or use dry ultramarine to make the window blue.

3. If a small crack appears on the glass, then cover it with colorless varnish. She won't bother you for a long time.

4. Treat the glasses with vinegar to get rid of annoying flies.

5. Do not forget to lubricate the fittings (moving parts of the window) with machine oil twice a year.

Consumer opinions: the better to wash plastic windows

On the site "Everything for Home" user Vera shares: "Soap solution is an excellent tool for quickly and easily cleaning plastic windows from dust and dirt."

Many people still wash their windows with ordinary soapy water.

Indeed, this is the way out. But for more effective cleaning, experts recommend a glass cleaner. Your windows will shine clean for several months.

On the "Sibmam" forum, user Lorochka advises: "Do not wipe the stains on them with acetone or another solvent."

On the same forum, user Lenochka writes that "traces of adhesive tape can be removed with a glass ceramic scraper."

It is, but it is very difficult to clean the windows from the adhesive tape in this way and not to scratch.

On the say7 forum, user Svetochka advises what and how best to wash plastic windows from yellow stains: “You need to take a damp sponge and a pinch of baking soda. Rub a little and dry with a paper towel. "

Indeed, baking soda can help combat the yellowing of plastic windows.

Plastic windows have become an integral part of modern life, although they appeared in it not so long ago. They are easier to care for than wooden ones, while they look no less beautiful and presentable. And yet, despite the simplicity and ease of use, they also need to be washed. At least twice a year, and even more often in case of strong and fast pollution. In general, wet cleaning is indispensable. And here is how to carry it out so that the windows not only sparkle, but also retain a shining appearance for a long time, and at the same time there would be no rainbow spots and stains on the surface, we will talk today.

Plastic windows: a bit of history

It is difficult to imagine modern life without plastic windows, but in fact they came into our life not so long ago. In essence, it is this part of the house that is considered the main source of heat loss. It is not surprising: a large area, poor sealing, the presence of cracks and cracks in the profile itself - all individually or in combination, lead to this problem. This statement is especially true for wooden options. In part, it was precisely for the sake of combating the loss of warm air that plastic windows were invented.

1. In comparison with the classic wooden version, they are easier to clean;
2. They are not afraid of excessive moisture, do not crack or disperse, they serve longer and more reliably;
3. They are also effective in terms of keeping warm;
4. They look neat, beautiful, keep their presentation for a long time.

All this helped the new invention very quickly enter Western life. Plastic windows came to our country much later. At first, they were haphazardly imported from abroad, and there was no established flow, and no one thought at all whether the products were suitable for our climate. But already in the mid-90s, the situation began to change. First, official dealers appeared, and already closer to the twentieth century - their own firms producing these products.

The widespread installation of plastic windows began after 2000, so we can say that such products have existed on the domestic market for only about 20 years.

Proper care and cleaning of plastic windows

And yet, at the moment, PVC windows are installed in almost every house, be it a residential or municipal building. And no matter how convenient and undemanding they are in operation, you still sometimes have to wash the glass surface and clean the frame structures. How to do it correctly, we will tell below.

All you need to do is follow a few simple rules:

1. Only wash windows in cloudy weather, out of direct sunlight. Otherwise, unsightly rainbow stains are guaranteed.
2. Choose a special glass cleaner. We will not advise the brand: for each person the one that is more convenient and easier for him to use becomes better. And not always advertised "Mister Muscle" may be right for you.
3. Use microfiber. Such a cloth has a special structure that very easily absorbs detergent and does not leave any streaks when wiped. With it, window cleaning is simplified to the maximum.
4. When choosing a detergent, pay attention to its composition. If alcohol is included, great. It is he who, instantly evaporating from the surface, provides perfect purity and radiance.
5. Never use abrasive products! It will scratch the surface, permanently ruining the appearance of the window, as well as degrading its performance.

The main secret is to wash competently and correctly. Stock up on all the necessary tools and substances:

1. With a sponge. It is needed if you decide to pre-wash the glass with water, as well as to clean frames and fittings.
2. Detergent. It must be selected individually. We have already outlined the main requirements above.
3. Microfiber. It will come in handy at the final stage of washing.
4. Spatula for cleaning glass. This item helps to easily and quickly remove all liquid and, again, avoid streaks.

Before starting the procedure, tidy up the windowsill. There should be nothing on it, remove all flowers, vases, etc. We start washing with the dirtiest parts. Usually this is a cornice, external parts of frames, gaps in double-glazed windows. All of them can be washed with soap and water, and quite quickly. The hardest part is the glass. Here, proceed from the degree of pollution.

If it is high, then pre-rinse with water and wipe dry. If the windows are not very dirty, then the described procedure can be dispensed with. We advise a simple way: take the liquid, evenly distribute it first over the upper half of the glass. Wipe quickly with microfiber, keep the cloth clean and dry. Then process the remaining bottom half in the same way. This is usually enough to make the glass look perfectly clear and shiny.

If the surface is very dirty, then first we advise you to thoroughly rinse it with warm water and soap, then wipe it dry and only then treat it with a special cleaning agent and microfiber.

Now let's talk about fittings. If not properly cared for, it can quickly deteriorate and start to go wedge. By the way, this is a fairly common problem with plastic windows, so wash carefully, handle every detail, while using a soft sponge or rag. Be sure to ensure that the surface is dry after wet processing. Excess moisture can also damage the mechanisms inside the frame.

So, washing plastic windows is not at all difficult, the main thing is to do it as needed and correctly. If looked after according to the requirements and not started, the product will last a very long time and retain not only its radiant appearance, but all functions in perfect condition. Plastic windows are an excellent guarantee that the house will be warm, light and cozy!

Video: how to clean windows without streaks