Unusual, mischievous, but so stylish and beautiful - all this can be said about women's hats with a pompom. Having been popular for a very long time, they again confidently entered modern fashion and won the hearts of many. Who would have thought that they could perfectly complement various images, combining the seemingly incompatible. But that, as it turns out, is the beauty of it.

Of course, there are a huge number of different models made with knitting needles or crochet: lush, voluminous, with large or small knitting, you can get lost in this choice. We offer you several amazing models that, thanks to detailed descriptions, you can easily repeat yourself.

Model with braids

This pattern is very popular, and even a beginner knitter can knit it.

We will need:

• yarn;
• knitting needles corresponding to the thickness of the selected yarn (you can use both double and circular knitting needles);
• auxiliary knitting needle of the same size.

We cast on the required number of loops, in our case it is 100, and knit it with a 2*2 elastic band. If you are planning a lapel, then you need to knit with an elastic band, about 30 rows, but if without a lapel, then half as much.

After we need to make an increase of 40 loops, for this we knit 2 loops from every 10th loop. Try to increase evenly, you should have a total of 140 stitches.

We knit three rows with facial loops and only then proceed to make the pattern.

Approximately on the 19th row, we begin decreasing; the correct execution is also indicated in the diagram.

On the 30th row we finish working with the pattern and knit with regular knit stitches. At this stage, control the length of the product according to your measurements, simultaneously starting to decrease every 2 loops. When you have 12-15 loops left, we finish the work by pulling the loops and securing the work.

Thus, we get a seamless hat, but if you do not have stocking or circular knitting needles, you can make this product on 2 regular knitting needles, then carefully sewing the product together.

At this stage, our hat is almost ready, all that remains is to sew on the most important attribute - our pompom. It can be made, as in our case, from fur, but it can also be made independently, from the same threads. How to do this is shown in detail in the photo.

Beanie hat

This hat model has long won the hearts of many due to its ease of execution. And with a pompom it looks even more interesting. Let's take a closer look at this type.

For work we will need:

• yarn (in our case, two colors);
• a hook of a suitable size;
• scissors:
• needle with a large eye.

Let's look at the job description. We cast on air loops, the number equal to the volume of your head (in this case, 50 loops).

Without knitting 8 loops of the first row, we unfold the knitting, making a lifting loop.

Having finished the third row, we connect it with the first unknitted row. And we do this in every row.

As a result, you should get a kind of wedge, as in the photo below.

In the same way we knit 4 more wedges.

At this stage it is necessary to sew our product along the side seams.

When stitched correctly, you should have a hole at the top of your head.

In order to close it, you need to use a needle and thread to connect all the wedges and tighten it.

That’s all, now all that’s left to do is make and sew on the pompom. How to make a pompom correctly is shown in the photo in the previous model.

Video on the topic of the article

This season, hats with pom-poms are at the height of fashion among hats. They managed to conquer everyone: both adults and children. Still would! They look very stylish and are comfortable to wear. They perfectly complement both a sporty outfit and a romantic look. A pompom hat will give you a little mischief. If you want to be noticed, choose bright colors. After all, it is not at all necessary to select all clothing items in the same color scheme. A pompom made of natural fur looks beautiful and rich. This accessory is perfect for both a fur coat and a short fur coat, jacket, down jacket, coat.

Set with fur pompom

A fluffy pom-pom with natural fur will complement any hat.

We offer a description of a beautiful dark blue knitted set, consisting of a hat with a natural fur pompom and chic in the same style. Relief braids, cross bar - looks cool!

Size: hats 52-56 cm, scarf 12 x 170 cm.
You will need:
— 250 grams of dark blue yarn with parameters 125m/50g (for example BBB Premiere Italy or another);
- straight and stocking (circular) knitting needles No. 3.5;
- fur pompom.
Density: 22 p. = 10 cm

Scheme and description of knitting a hat with a pompom on knitting needles

1. First you need to tie the cross bar of the hat with the bubo. To do this, cast on 16 stitches on straight needles and knit straight 54 cm (= 184 rubles) according to pattern 2. Cast off the loops and sew them along the narrow side.
2. On the long side (where the braid is) cast on 114 stitches along the edge. and distribute approximately equally among four stocking needles (28-29 stitches each) and knit with a pattern according to pattern 3.
3. When the product is 14 cm high (with the bar), we begin reducing the crown. In each purl sector, knit 2 stitches together with the purl stitch (= 95 stitches).
4. After 5, in the sixth row, purl 2 together again (= 76 stitches).
5. Through the row - in the eighth row. Knit the two loops remaining in the purl sector together again purlwise (= 57 p.).
6. At ten p.m. - two front ones in braids together (= 38 p.).
7. All loops are 2 at a time, then again through the row.
8. Cut the yarn, pull the tip inside the hat and tie it with a working thread, secure with a knot.
9. Sew the pompom to the hat.

Knit the scarf according to pattern 1 at the rate of 37 stitches.

Chic option for the winter

Chic warm set of hat and scarf for the winter

You can go to a store and buy a fashionable headdress there. After all, there is now a huge selection of different models. Or you can knit such a hat with your own hands. It knits quite quickly and easily. When choosing a pattern, everything depends only on your imagination. In addition, the finished product will fit perfectly on the head, and the cost savings will be obvious.
Let's knit a warm winter hat with a large pompom for women.

Required:
— Eskimo yarn from Drops (100% wool 50mt/50g);
- toe knitting needles No. 8.
Density: 11 p. = 10 cm

Patterns:
— elastic band 1 x 3 (knit 1, purl 3);
- garter stitch (when knitting in the round, 1 row - knit, 1 row - purl)
Decrease hint: work 5 stitches. (K1, K1, P1, K1, K1), then slip the 2nd stitch over the right sp. over the 1st loop, the 3rd over the 1st, the 4th also and the 5th - you decreased 4 stitches.

Description of knitting a hat

1. Cast on 64 stitches, bind into circle and place 16 stitches per needle. Knit with an elastic band 1 x 3 to a height of 7 cm.
2. Proceed to the main pattern: * K1, 1 pet. garter stitch, p1, 1 st. garter stitch * - repeat until the end.
3. When you knit a 22 cm hat, decrease 16 stitches like this:
   * decrease 4 stitches. (hint above), 11 sts with the main pattern * - repeat to the end (= 48 sts).
4. After 25 cm from the cast-on edge, decrease another 16 stitches:
   * decrease 4 stitches. (hint above), 7 sts with main pattern * (= 32 sts).
5. Through a row - knit 2 stitches at a time (= 16 stitches).
6. Pull the yarn through the remaining loops and reinforce.

Scarf: Size - 30 x 150 cm. You will need 350 grams of similar yarn.

1. On knitting needles No. 9, cast on 33 sts and knit 8 r. handkerchief knitted (for straight knitting, all stitches in all rows are knit).
2. Distribute the loops like this (right side): 4 stitches. knitting, * 1 knit, 1 p.plate knitting, 1 purl., 1 p.plate knitting. * - to the end, 1 knit, 4 p. scarf knit.
3. After 146 cm, go to garter stitch - 8 rows.

With pompom for beginners

How to knit a women's hat for beginners? Let's figure it out step by step.
Most often, a hat takes 100 grams of yarn (the thicker, the greater the consumption).

Before you start knitting, you need to decide on the design of the future hat and calculate it. To do this, you first need to knit a sample measuring 10x10 cm.

How to sew a pompom to a hat?

If you attach the pompom with a stitch in one place, it will dangle and there will be no view. In order for the balaboshka to sit firmly on the hat, it must be tied in two places so that the stitch is 1 - 1.5 cm.
A fur pom pom is often sold with a loop. Use it for sewing. To do this, you need to turn the hat inside out, find the center of the crown, step back from it to the right about 1.5 cm. Insert the hook into the knitting and grab the loop from the pompom from the outside. Pull both ribbons inward, but not completely. Then move to the left of the center about 1.5 centimeters. And repeat the steps. Hook the hook onto the second part of the original loop. Thus, there will be 2 loops from the inside of the hat. They need to be tied in a knot.

You can also sew on a button, then the bubo from the hat can be easily unfastened when washing. How to do this, see.

A hat with a pompom is a fashion trend this season
Review of models from our website website:
The site has already reviewed many models of knitted hats with a bubo and, of course, there is no point in repeating them. Look at the photo and follow the link to learn how to knit this style.

Read a step-by-step description of knitting a hat

Knitting pattern for a thick hat with a pompom

How to knit a hat with a bubo using a wave pattern?

Two charming knitted hats with large pompoms on the top

Knitted hats with pompoms, description and diagram

How to knit hats with knitting needles: cast on 95 stitches on the knitting needles.
Join in a round row if you want to knit in the round, or cast on two extra stitches if you want to knit in straight and reverse rows.
Start knitting with an elastic band with braids according to the pattern, repeat the pattern 5 times in width.
Start decreasing for the crown from the 55th row: on sections of purl loops, knit 2 purls together. 10 times along the row (once on each side of the braid).
Repeat decreases on each row until the end of the pattern.
In the next row, knit all the loops two at a time into a pattern.
Tighten the loops that remain with the rest of the thread.

Details for the diagram:

Cross k2/p1-k2. left: remove 2 loops onto an additional knitting needle, which you leave before work, knit 2 knits, 1 purl. from the left knitting needle and knit 2. with an additional knitting needle.
Cross K2/K2. left: remove 2 loops onto an additional knitting needle, which you leave before work, knit 2 knits. from the left knitting needle and knit 2. with an additional knitting needle.
Cross K2/K2. right: remove 2 loops onto an additional knitting needle, which you leave at work, knit 2 knits. from the left knitting needle and knit 2. with an additional knitting needle.
Cross k2/p2. left: remove 2 loops onto an additional knitting needle, which you leave before work, knit 2 purls. from the left knitting needle and knit 2. with an additional knitting needle.
Cross k2/p2. right: remove 2 loops onto an additional knitting needle, which you leave at work, knit 2 knits. from the left knitting needle and 2 p. with an additional knitting needle.

Cross k2/p1. left: remove 2 loops onto an additional knitting needle, which you leave before work, knit 1 purl. from the left knitting needle and knit 2. with an additional knitting needle.
Cross k2/p1. right: remove 1 loop onto an additional knitting needle, which you leave behind the work, knit 2 knits. from the left knitting needle and 1 purl. with an additional knitting needle.
Cross K1/K1. left: remove 1 loop on an additional knitting needle, which you leave before work, knit 1 person. from the left knitting needle and knit 1. with an additional knitting needle.
Cross K1/K1. right: remove 1 loop onto an additional knitting needle, which you leave behind the work, knit 1 person. from the left knitting needle and knit 1. with an additional knitting needle.
Knit 2 knits together. left: remove the loop, knit 1, throw the removed loop over the knitted one.
Knit 2 knits together. right: insert the right knitting needle into the second, then into the first loops of the left knitting needle and knit them from left to right together with the front one behind the front walls.
Knit a double decrease: remove the loop, knit 2 knits together. to the right, then throw the removed loop over the knitted one.

If you are just starting to knit, it is easiest to start with small items such as a hat, scarf or mittens. And after that, you can move on to more complex models. For example, knitted winter hats are made literally in two evenings using two knitting needles. This activity is very suitable for beginners. You can decorate the hat with a pom-pom made of natural fur or a pom-pom made from threads. You will learn how to knit a women's and men's hat with a pompom in this article.

In this way, which will be presented in the article, you can knit not only winter hats for adults, but also children's headwear models for boys and girls with fur decor. Surely, every child will love a hat with a large pompom made of natural fur. So, for work you will need yarn and knitting needles. This headdress is knitted in one piece and then simply stitched at the back. Cast on seventy-five stitches, from which you should knit eight stripes with an elastic band. Simply put, you need to alternate purl and knit stitches. After this, proceed to the braid pattern, the diagram of which will be presented below in the text. Horizontal lines indicate purl loops, and vertical lines indicate knit stitches. Knit until you have seven such repeats from the faces. buttonholes. You should end up with braids that will decorate your hat. Continue this knitting for thirty-six rows in a straight line. Next, you should reduce the loops, namely, in the rapport itself, you need to tie the third and fourth links together. Then reductions are made only after 2 rubles. When you have a minimum number of links left, you can close them. All that remains is to make a seam at the back of the head. In this case, a hook will come in handy. Pull the fabric and make crocheted buttonholes. That's all, the hat is ready. At the very end, a pompom is made from natural fur. For children, you can make decor from larger size fur.

Hats with a fur pompom look much more beautiful and respectable. To do this, you will need a small piece of natural fur, such as arctic fox. You also need a thick needle, nylon thread, a small lump of padding polyester or cotton wool, scissors and patterns made of thick cardboard.

Cut out a circle of suitable size from paper and attach it to the wrong side, with the fur pile facing you. Then trace with a pen and cut along the contour. Now the pompom blank is ready. Now overcast along the edge of the skin and pull the thread through the entire stitch to subsequently pull the product into a ball. A lump of natural fur must be filled with something. If you don’t have padding polyester, you can roll up a small ball of cotton wool, then find the middle in it, which is tied with a ribbon or rope. If you knit children's hats, for example for a boy, then the fur pompom can be made removable. In this case, you need to use openwork braid, as its edges will be noticeable. Place the padding polyester inside and leave the ribbon outside. Then pull the workpiece so that the hole is not visible at the bottom of the pompom. Now sew the product tightly and the pompom for the hat is ready. If you do not plan to make the pompom removable, but just want to sew it to the hat, then do not roll up the cotton wool or padding polyester, but simply push it through a small hole inward with a knitting needle to make the pompom more voluminous. Now you know how to make a hat for adults and children's knitting patterns with a fur pompom. And most importantly, a pompom for a hat is very easy and quick to make.

Video: Knitting a hat with a honeycomb pattern and a pompom

Video: How to make a fur pompom for a hat

Knitting a hat with a pompom for men

Knitting such a men's hat pattern is perfect for boys. In this case, it is not necessary to make fur pompoms from natural fur. Children's winter hats can be decorated with a thread pompom. It will also be a wonderful decoration for children.

The knitting pattern for a hat with a jacquard pattern will be presented in this section of the article. To work, you will need several colors of wool yarn, preferably black and white, as well as circular knitting needles numbered 3 and 3.5. The two-by-two rib pattern is knitted by alternating two faces. n and two out. p. To make the front stitch you need knits. R. perform the same loops, and purl with similar links. During circular knitting, only knits are performed. n. The knitted density of the hat is twenty-two stitches of the front stitch per ten centimeters.

From black threads, cast on one hundred and twenty loops and make a circular knitting elastic band of six centimeters. After that, change the knitting needles to a different size and make faces. smooth surface Then, according to the diagram, knit a pattern repeat. When the height of the product is twenty-two centimeters, put black yarn into work again, while using knitting needles to reduce the links according to the following pattern: knit six faces. p., then two joint knits. Repeat this way until the end of the strip. Next 2 p. there will be no reductions.

The new line starts with five faces. p., then two buttonholes together. way and further doing this repetition. Next are two lines without decreases. Reductions must continue to be made in every 3 r., until only fifteen links remain. One more line without decreases, and then two joint faces. way. At the end, the thread needs to be cut and the remaining links tightened.

You can make a pompom for a hat with your own hands in a matter of minutes. So, take the rest of the yarn. Secure one end of the thread between the fingers of one hand, and begin to wind the yarn on three fingers until you get a small ball. The more base material you wrap around your hand, the more magnificent the pompom on the hat will be. When you have completed this exciting process, tie a small knot in the center of the workpiece. Use scissors to cut where the ball bends. If the ends do not stick out straight, carefully trim them to make the pile the same everywhere. For those who want to decorate the boys' hat with several pom-poms, but of a smaller size, use an ordinary fork. The workflow remains the same as with the hand. Knitting a headdress for boys can be seen in the video presented.

Video: Learning to knit a hat with a pompom

Video: A simple version of knitting a snood hat with pompoms

Hat with braids and fur pompom and knitted scarf

Hat size: 56. You will need: yarn (50% wool, 50% acrylic, 250 m/100 g) -200 g white, knitting needles No. 3-3.5, fur pompom.

Rib 1×1: knit knit 1 alternately. p. and 1 p. P.

Pattern with braids: 1st, 3rd, 5th rows (front rows) - remove 1 stitch, * purl 1. p., blitz. p. (braid)*, repeat *-* until the end of the row. 2nd, 4th and 6th rows - knit stitches according to the pattern. 7th row - remove 1 st, * purl 1. p., remove the next 3 p. knitting needle before work, knit 3 knits. p. and then 3 p. with extra. knitting needles.*, repeat *-* until the end of the row. Next repeat rows 1-8.

A cap

Cast on 130 stitches on the needles, knit 6-7 cm with a 1×1 elastic band. Next, knit in a braided pattern. At a height of 15 cm from the elastic band, start making decreases. To do this, divide the number of loops by 4 and on both sides of each sector, decrease 1 stitch in each knit. row, maintaining the pattern. Make a seam. Sew a fur pompom onto the top of the hat.

Scarf

Cast on 70 stitches and knit in a braided pattern to the required length. Steam the finished product through damp gauze or cotton cloth.